rcgromov@gmail.com
Evgeniy Gromov

TSS Limiter. For your VICTORY'S

Newest. Lighter. Smallest...

Online run data's, to your mobile phone!

Official site: www.tsslimiter.com

Артикул:
Наличие: Есть в наличии
€ 75
Купить в один клик добавить к сравнению перейти к сравнению
  • Описание
  • Отзывы (0)

TECHNICAL SPECIFICATION

Parameter

Value

Note

Measured voltage

0 – 44V

DC

Voltage measurement accuracy

±0.1%

 

Measured current (up to 20 sec)

1 – 150A

 

Measured current (DC)

1 – 100A

 

Current measurement accuracy

±0.5% + ±50mA

 

Measured energy

0 – 300,000Wh

 

Energy measurement accuracy

±1.0%

 

Temperature measurement

-10 – +150⁰C

Device temperature

Temperature measurement accuracy

±1.0⁰C

 

Sampling frequency

300Hz

 

Series resistance

0.25mOhm

 

Current consumption

6mA

 

BEC voltage

4 – 13V

 

Type of communication interface

BLE

Bluetooth Low Energy 5.0

Communication Interface range

100m

In direct visibility

Receiver signal

0.7 – 2.3ms

Standard PPM 3.3-10V

Working temperature range

0 – 50⁰C

 

IP rating

IP67

 

Dimensions of the device

22.5 х 19.5 х 10.5mm

No wires included

Weight

18g

Including all wires and plugs

Wire to receiver length

240mm

 

Wire to ESC length

40mm

 

Type of signal wires

26AWG (JR)

 

Length of the power wire

100mm

 

 

SHORT DESCRIPTION

In total, the device has 14 sets of settings, 8 (6 - 14) of which are user-defined and are subject to change.

The device has 6 sets of preset settings. These settings cannot be changed and 1-5 sets fully comply with the Naviga rules.

LOGGER AND TELEMETRY

The device is equipped with logger, which can be used as an online telemetry and as an ordinary logger, allowing you to read the meashured data after the race.

Logger and telemetry display the following parameters:

  • Current;
  • Average current for 10 seconds;
  • Voltage;
  • Measured energy;
  • Measured capacity;
  • Temperature (own);
  • Power consumption for the race (economizer);
  • Average current for the race;
  • Average voltage for the race;
  • Measured race time.

A display of the average current per race and the average voltage per race will be added soon.

CONFIGURATION AND SOFTWARE

The basic settings of the limiter can be changed using a button that is connected via a wire that goes to the receiver.

Functions of setting by button is given in the table:

Settings set number

Purpose

Energy limitation

0

Training mode, telemetry only

1

Mini Eco, Mono, Hydro

21Wh

2

Eco Expert, Mono I, Hydro I

60Wh

3

Mono II, Hydro II

120Wh

4

FSR-E

180Wh

5

For tests only

2Wh

Function

Parameter

Note

Reset of energy calculation

Hold down for 10 ± 3 seconds

Indication can be updated with delay in one period

Switching the set of settings up

Push once

Only if the energy calculation is not started. Cyclically switching between 0–5 sets

Switching the set of settings down

Hold down for 1 second

Only if the energy calculation is not started. Cyclically switching between 0–5 sets

Password reset

Hold down for 30 ± 10 seconds

Only if the energy calculation is not started.

Manual start of bootloader

Hold down before switching on, release as soon as the green LED goes out

In normal device operation it is not used. Required if there are problems with updating the firmware in a regular manner.

 

Complet of delivery: 

1. TSS limiter V.1

2. Bottom

Пока нет отзывов

Оставить отзыв

Все поля обязательны к заполнению
Вы не представились
Неправильно введен e-mail
Нам интересно Ваше мнение о товаре
CAPTCHAReload image
Вы неправильно ввели текст с картинки
Перед публикацией отзывы проходят модерацию
One klik order
Настоящим подтверждаю, что я ознакомлен и согласен с условиями оферты и политики конфиденциальности.