New from Tenshok.
Controller of three-phase motors: ВX 80
They began to produce (which seems quite logical) their own controllers for their (and other trade marks) three-phase motor's.
New from Tenshok will be suitable for Expert with 3S Lipo's, FSR E from 3S to 6S, Mono1, HYDRO1.
Full, 100% water protection!!!
Cable section (cables in the set. not soldered) - 3.3 mm. Sq. (12 AWG)
Built-in water cooling
Controller is suitable only for sensorless three-phase motors
|LiPo cells||from 2S to 6S|
|Working amperage||80A continue; 100А up to 10 с.|
|Dimensions||54 x 35 x 14 mm|
|Weight w/o power wires||66 gramm|
Thermocuter when overheating power transistors.
Turns off when the transmitter signal is lost
Automatic detection of the number of cell's connected.
Programmed cut-off of the minimum block at-touch:
Auto (programmed at 3.0; 3.1; 3.2; 3.4; 3.5 volts),
5 volts per block,
6 volts per block,
9 volts per block,
12 volts per block.
Programmed timing: 0, 4, 8, 16, 30 degrees
Gas rate on display: 0 to 100%
Exposed modes: forward-brake/forward-brake-reverse
A new word in shipcontrollers.
And it's REALLY small!